销轴用平垫圈（英文版）
英文名称： Plain washers for clevis pins
中标分类： 机械>>通用零部件>>J13紧固件
ICS分类： 机械系统和通用件>>紧固件>>21.060.30垫圈、锁紧件
采标情况： eqv ISO 8738:1986
发布部门： 国家质量技术监督局
发布日期： 2000-09-26
实施日期： 2001-02-01
首发日期： 2000-09-26
复审日期： 2004-10-14
提出单位： 国家机械工业局
归口单位： 全国紧固件标准化技术委员会
主管部门： 中国机械工业联合会
起草单位： 机械科学研究院
页数： 5页
出版社： 中国标准出版社
出版日期： 2001-02-01
1. Scope
This standard specifies plain washers whose nominal specification is from 3mm to 100mm, property grade is 160HV and product grade is of Grade A and that are used for pins with split pin hole of GB/T 880 and clevis pins with head of GB/T 882.
2. Notmative Reference
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
GB/T 90-1985 Acceptance Inspection, Marking and Packaging of Fasteners (eqv ISO 3269: 1984)
GB/T 880-1986 Pins with Split Pin Hole
GB/T 882-1986 Clevis Pins with Head
GB/T 1237-2000 Designation System for Fasteners (eqv ISO 8991: 1986)
GB/T 3103.3-2000 Tolerances for Fasteners -- Plain Washers (idt ISO 4759-3:1991)
GB/T 5267-1985 Electroplated Coatings on Threaded Fasteners
GB/T 11376-1997 Phosphate Conversion Coatings for Metals (eqv ISO 9717:1990)
3. Dimension
No comments:
Post a Comment