不锈钢热轧钢板和钢带（英文版）
英文名称： Hot rolled stainless steel plate sheet and strip
替代情况： 替代GB/T 4237-1992
中标分类： 冶金>>钢铁产品>>H46钢板、钢带
ICS分类： 冶金>>钢铁产品>>77.140.50扁平钢和半成品
发布部门： 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期： 2007-04-25
实施日期： 2007-10-01
首发日期： 1984-03-26
提出单位： 中国钢铁工业协会
归口单位： 全国钢标准化技术委员会
主管部门： 中国钢铁工业协会
起草单位： 太原钢铁（集团）有限公司、冶金工业信息标准研究院
起草人： 牛晓玲、高宗仁、董莉、郝瑞琴、王晓虎、张建生
页数： 平装16开/页数：32/字数：57千字
出版社： 中国标准出版社
出版日期： 2007-10-01
本标准规定了不锈钢热轧钢板和钢带的牌号、尺寸、允许偏差及外形、技术要求、试验方法、检验规则、包装、标志及产品质量证明书。
本标准适用于耐腐蚀不锈钢热轧厚钢板、耐腐蚀不锈钢热轧宽钢带及其卷切定尺钢板、纵剪，也适用于耐腐蚀不锈钢热轧窄钢带及其卷切定尺钢带。
1. Scope
This Standard specifies the designation, dimension, allowable deviation, shape, technical requirements, test methods, inspection rules, packaging, labeling and quality certification of hot rolled stainless steel sheets and plates.
This Standard is applicable to corrosive stainless steels hot rolling thick steel plates which rolled by reversible mill, corrosive stainless steels hot rolled width steel strips rolled by continuous rolling mill, that roll-cut fixed length steel plates and longitudinal shearing width steel strips, also apply to corrosive stainless steel hot rolling narrow steel strips and that roll-cut fixed length steel plates.
2. Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments to, or revisions of (excluding corrigendum), any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 222 Method of sampling steel for determination of chemical composition and permissible variations for product analysis
GB/T 223.3 Methods for chemical analysis of iron, steel and alloy--The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.4 Methods for chemical analysis of iron, steel and alloy-- The volumetric method for determination of manganese content by ammonium nitrate oxidation
GB/T 223.5 Methods for chemical analysis of iron, steel and alloy The reduced
molybdosilicate spectrophotometric method for the determination of acid-soluble silicon content
GB/T 223.8 Methods for chemical analysis of iron, steel and alloy The sodium fluoride separation-EDTA titration method for the determination of aluminium content
GB/T 223.9 Methods for chemical analysis of iron, steel and alloy The chrom azurol S photometric method for the determination of aluminium content
GB/T 223.10 Method of chemical analysis on steel and alloy -- The cupferron separation-chrome azurol S photometric method for the determination of aluminium content
GB/T 223.11 Methods for chemical analysis of iron, steel and alloy--The ammonium persulfate oxidation volumetric method for the determination of chromium content
GB/T 223.16 Methods for chemical analysis of iron, steel and alloy--The chromotropic acid photometric method for the determination of titanium content
GB/T 223.18 Methods for chemical analysis of iron, steel and alloy - The sodium thiosulfate separation iodimetric method for the determination of cupper content
GB/T 223.19 Methods for chemical analysis of iron, steel and alloy – The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.23 Methods for chemical analysis of iron, steel and alloy - The dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.24 Methods for chemical analysis of iron, steel and alloy - The extraction separation--the dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.25 Methods for chemical analysis of iron, steel and alloy. The dimethylglyoxime gravimetric method for the determination of nickel content
GB/T 223.26 Methods for chemical analysis of iron, steel and alloy - The thiocyanate direct photometric method for the determination of molybdenum content
GB/T 223.27 Methods for chemical analysis of iron, steel and alloy - The thiocyanate-butyl acetate extraction spectrophotometric method for the determination of molybdenum content
GB/T 223.28 Methods for chemical analysis of iron, steel and alloy--The α-benzoinoxime gravimetric method for the determination of molybdenum content
GB/T 223.36 Methods for chemical analysis of iron, steel and alloy. The neutral titration method for the determination of nitrogen content after distillation separation
GB/T 223.40 Methods for chemical analysis of iron, steel and alloy--The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content
GB/T 223.53 Methods for chemical analysis of iron, steel and alloy--The flame atomic absorption spectrophotometric method for the determination of copper content
GB/T 223.58 Methods for chemical analysis of iron, steel and alloy--The extraction-absorption catalytic polarographic method for the determination of manganese content
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy--The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.61 Methods for chemical analysis of iron, steel and alloy--The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
GB/T 223.68 Methods for chemical analysis of ironsteel and alloy--The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
GB/T 223.69 Methods for chemical analysis of iron, steel and alloy--The gas-volumetric method after combustion in the pipe furnace for the determination of carbon content
GB 228 Metallic materials--Tensile testing of room temperature (GB/T 228-2002, eqv ISO 6892:1992)
GB/T 230.1 Metallic Rockwell hardness test—Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (GB/T 230.1-2004, ISO 6508-1: 1999, MOD)
GB/T 231.1 Metallic materials—Brinell hardness test—Part 1 Test method (GB/T 231.1-2002, eqv ISO 6506-1: 1999)
GB/T 232 Metallic materials--Bend test (GB/T 232-1999, eqv ISO 7438: 1985(E))
GB/T 247 General rule of acceptance, package, mark and certification for steel plates (sheets) and strips
GB 709 Dimensions, shape, weight and tolerances for hot-rolled plates and sheets
GB/T 1172 Conversion of hardness and strength for ferrous metal
GB/T 2975 Rules for sampling in mechanical and technological testing of steel products GB/T 4334.1 Stainless steels--10 percent oxalic acid etch test
GB/T 4334.2 Stainless steels--Ferric sulfate-sulfuric acid corrosion test
GB/T 4334.3 Stainless steels--65 percent nitric acid corrosion test
GB/T 4334.5 Stainless steels--Method of copper sulphate-sulphuric acid corrosion test
GB/T 4340.1 Metallic materials--Vickers hardness test-- Part 1: Test method (GB/T 4340.1-1999, eqv ISO 6507-1: 1987)
GB/T 9971-2004 Pure iron for raw material
GB/T 10125 Corrosion tests in artificial atmosphere--Salt spray tests (SS tests)
GB/T 11170 Method for photoelectric emission spectroscopic analysis of stainless steel
GB/T 20066 Steel and iron / sampling and preparation of samples for the determination of chemical composition (GB/T 20066-2006, ISO 14284: 1996, IDT)
GB/T 20878 Stainless and heat-resisting steels—Designation and chemical composition
3. Terms and Symbols
No comments:
Post a Comment