建筑通风和排烟系统用防火阀门（英文版）
英文名称： Fire dampers for building venting and smoke-venting system
替代情况： 替代GB 15930-1995;GB 15931-1995
中标分类： 医药、卫生、劳动保护>>消防>>C82防火技术
ICS分类： 环保、保健与安全>>消防>>13.220.50建筑材料和构件的阻燃性
发布部门： 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期： 2007-04-27
实施日期： 2008-01-01
首发日期： 1995-12-20
提出单位： 中华人民共和国公安部
归口单位： 全国消防标准化技术委员会
主管部门： 公安部
起草单位： 公安部天津消防研究所、广州泰昌实业有限公司等
起草人： 解凤兰、赵华利、纪祥安、李希全、张君娜、张丽梅
页数： 平装16开 页数：17, 字数：28千字
出版社： 中国标准出版社
出版日期： 2008-01-01
本标准规定了建筑通风、空气调节和排烟系统用防火阀、排烟防火阀、排烟阀的术语和定义、分类及标记、材料及配件、要求、试验方法、检验规则、标志、包装、储运和贮存等。
本标准适用于工业与民用建筑、地下建筑的通风和空气调节系统中设置的防火阀，工业与民用建筑、地下建筑的机械排烟系统中设置的排烟防火阀、排烟阀。
Contents
Foreword
1. Scope
2. Normative Reference
3. Terms and Definitions
4. Classifications and Designation
5. Material and Spare Parts
6. Requirements
7. Test Method
8. Inspection Rules
9. Marking, Packaging, Transportation and Storage
1. Scope
This standard specifies terms, definitions, classifications, marking, materials, designation, requirements, test method, inspection rules, marking, packaging, transportation and storage of fire dampers, fire damper in smoke-venting systems and smoke dampers (hereinafter referred to as damper) for building venting, air conditioning and smoke-venting systems.
This standard is applicable to fire dampers used in venting and air conditioning systems, as well as fire damper in smoke-venting systems and smoke dampers used in mechanical smoke-venting systems of industrial and civil buildings and underground buildings.
2. Normative Reference
The following documents contain contents which, through reference in this text, composite provisions of this standard. For dated reference, subsequent amendments (excluding corrigenda content) to, or revisions of, any of these publications do not apply. Parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 191 Packaging -- Pictorial Marking for Handling of Goods (GB/T 191-2000, eqv ISO 780:1997)
GB/T 1804-2000 General Tolerances -- Tolerances for Linear and Angular Dimensions Without Individual Tolerance Indications (eqv ISO 2768-1:1989)
GB/T 2624 Measurement of Fluid Flow by Means of Orifice Plates, Nozzles and Venturi Tubes Inserted in Circular Cross-section Conduits Running Full
GB 4717-1993 General Technical Conditions for Fire Alarm Control Unit
GB 9969.1 General principles for preparation of instructions for use of industrial products
GB/T 9978-1999 Fire-resistance tests-Elements of building construction (neq ISO/FDIS 934-1:1997)
GB/T 13306 Plates
GB/T 13384 General specifications for packing of mechanical and electrical product
GB/T 14436 General principles of industrial product guarantee documents
3. Terms and Definitions
For the purposes of this standard, the following terms and definitions apply.
3.1 Fire damper
No comments:
Post a Comment