输送流体用无缝钢管（英文版）
英文名称： Seamless steel tubes for liquid service
替代情况： 替代GB/T 8163-1999
中标分类： 冶金>>钢铁产品>>H48钢管、铸铁管
ICS分类： 冶金>>钢铁产品>>77.140.75特殊用管钢
采标情况： NEQ EN 10216-1:2004
发布部门： 中国钢铁工业协会
发布日期： 2008-08-19
实施日期： 2009-04-01
首发日期： 1987-08-22
提出单位： 中国钢铁工业协会
归口单位： 全国钢标准化技术委员会
主管部门： 中国钢铁工业协会
起草单位： 鞍钢股份有限公司、攀钢集团成都钢铁有限责任公司、湖南衡阳钢管集团有限公司
起草人： 张会轩、章澎、朴志民、李志、赵斌、晏如
页数： 10页
出版社： 中国标准出版社
出版日期： 2009-04-01
1范围
本标准规定了输送流体用无缝钢管的订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。
本标准适用于输送流体用一般无缝钢管。
2规范性引用文件
3订货内容
按本标准订购钢管的合同或订单应包括下列内容：
a） 标准编号；
b） 产品名称；
c） 钢的牌号，有质量等级的应注明质量等级；
d） 尺寸规格；
e） 订购数量（总重量或总长度）；
f） 交货状态；
g） 特殊要求；
4 尺寸、外形和重量
4.1外径和璧厚
钢管的外径（D）和璧厚（S）应符合GB/T 17395的规定。
根据需方要求，经供需双方协商，可供应其他外径和璧厚的钢管。
4.2外径和璧厚的允许偏差
4.2.1钢管的外径允许偏差应符合表1的规定。
表1钢管的外径允许偏差
1. Scope
This standard specifies order content, dimensions, shape, weight, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of seamless steel tubes for liquid service.
This standard is applicable to general seamless steel tubes for liquid service.
2. Normative Reference
The following documents contain contents which, through reference in this text, composite provisions of this standard. For dated reference, subsequent amendments (excepting corrigenda content) to, or revisions of, any of these publications do not apply. Parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 222 Permissible Tolerances for Chemical Composition of Steel Products
GB/T 223.3 Methods for Chemical Analysis of Iron, Steel and Alloy; The Diantipyrylmethane Phosphomolybdate Gravimetric Method for the Determination of Phosphorus Content
GB/T 223.5 Methods for Chemical Analysis of Iron, Steel and Alloy; The Reduced Molybdosilicate Spectrophotometric Method for the Determination of Acid-soluble Silicon Content
GB/T 223.9 Methods for chemical analysis of iron, steel and alloy－The chrome azurol S photometric method for the determination of aluminium content
GB/T 223.11 Methods for chemical analysis of iron, steel and alloy The ammonium persulfate oxidation volumetric method for the determination of chromium content
GB/T 223.12 Methods for chemical analysis of iron, steel and alloy The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
GB/T 223.13 Methods for chemical analysis of iron, steel and alloy－The ammonium ferrous sulfate titration method for the determination of vanadium content
GB/T 223.14 Methods for chemical analysis of iron, steel and alloy－The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
GB/T 223.16 Methods for chemical analysis of iron, steel and alloy The chromotropic acid photometric method for the determination of titanium content
GB/T 223.18 Methods for chemical analysis of iron, steel and alloy The sodium thiosulfate separation iodimetric method for the determination of copper content
GB/T 223.19 Methods for chemical analysis of iron steel and alloy; The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.23 Methods for chemical analysis of iron, steel and alloy; The dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.27 Methods for chemical analysis of iron, steel and alloy; The thiocyanate-butyl acetate extraction spectrophotometric method for the determination of molybdenum content
GB/T 223.37 Methods for chemical analysis of iron steel and alloy; The indophenal blue photometric methods for the determination of nitrogen content after distillation separation
GB/T 223.40 Iron steel and alloy -- Determination of niobium content by the sulphochlorophenol S spectrophotometric method
GB/T 223.49 Methods for chemical analysis of iron, steel and alloy Extraction separation-chlorophosphonazo mA spectrophotometric method for the determination of the total rare earth content
GB/T 223.53 Methods for chemical analysis of iron, steel and alloy; The flame atomic absorption spectrophotometric method for the determination of copper content
GB/T 223.54 Methods for chemical analysis of iron, steel and alloy; The flame atomic absorption spectrophotometric method for the determination of nickel content
GB/T 223.58 Methods for chemical analysis of iron, steel and alloy; The sodium arsenite-sodium nitrite titrimetric method for the determination of manganese content
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy; The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.61 Methods for chemical analysis of iron, steel and alloy; The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy; The butyl acetate extraction photometric method for the determination of phosphorus content
GB/T 223.63 Methods for chemical analysis of iron, steel and alloy; The sodium(potassium) periodate photometric method for the determination of manganese content
GB/T 223.67 Methods for chemical analysis of iron, steel and alloy The reducing distillation-methylene blue photometric method for the determination of sulfur content
GB/T 223.68 Methods for chemical analysis of iron, steel and alloy; The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
GB/T 223.69 Methods for chemical analysis of iron, steel and alloy; The gas- volumetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.71 Methods for chemical analysis of iron, steel and alloy; The gravimetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.72 Methods for chemical analysis of iron, steel and alloy The alumina chromatographic separation-barium sulfate gravimetric method for the determination of sulphur content
GB/T 228 Metallic materials--Tensile testing at ambient temperature (GB/T 228-2002, eqv ISO 6892:1998)
GB/T 229 Metallic materials -- Charpy pendulum impact test method (GB/T 229-2007, ISO 148-1:2006, MOD)
GB 241 Metal materials – Tube -- Hydrostatic pressure test
GB/T 242 Metal materials – Tube -- Drift-expending test (GB/T 242-2007, ISO 8493: 1998, IDT)
GB/T 244 Metallic materials--Tube--Bend test (GB/T 244-2008, ISOL 8491: 186, IDT)
GB/T 246 Metal materials – Tube -- Flattening test (GB/T 246-2007, ISO 8492:1998, IDT)
GB/T 699 Quality carbon structural steels
GB/T 1591 High strength low alloy structural steels
GB/T 2102 Acceptance packing marking and quality certification of steel pipe
GB/T 2975 Steel and steel products--Location and preparation of test pieces for mechanical testing (GB/T 2975-1998, eqv ISO 377:1997)
GB/T 4336 STANDARD test method for spark discharge atomic emission spectrometric analysis of carbon and low-Alloy steel (routine method)
GB/T 5777 Seamless steel pipe and tubing-Methods for ultrasonic testing (GB/T 5777-2008, ISO 9303:1989, MOD)
GB/T 7735 Steel tubes—The inspection method on eddy current test (GB/T 7735-2004, ISO 9340:1989, MOD)
GB/T 12606 Steel tubes--The testing method of magnetic flux leakage (GB/T 12606-1999, eqv ISO 9402: 1989, ISO 9598:1989)
GB/T 17395 Dimensions, shapes, masses and tolerances of seamless steel tubes (GB/T 17395-2008, ISO 1127:1992, ISO 4200:1991, ISO 5252:1991, NEQ)
GB/T 20066 Steel and iron: Sampling and preparation of samples for the determination of chemical composition (GB/T 20066-2006, ISO 14284:1996, IDT)
GB/T 20123 Steel and iron—Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace (routine method) (GB/T 20123-2006, ISO 15350:2000, IDT)
GB/T 20124 Steel and iron—Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (GB/T 20124-2006, ISO 15351:1999, IDT)
3. Order Content
No comments:
Post a Comment